跳转到主内容

HP Elite x2 1012 G2 SSD Replacement

你所需要的

  1. HP Elite x2 1012 G2 SSD Replacement, Screen: 步骤 1 中的图像 1,1
    • Make sure the device is turned off before starting.

    • Orient the device so the back is facing you, with the kickstand up.

  2. HP Elite x2 1012 G2 SSD Replacement: 步骤 2 中的图像 1,3 HP Elite x2 1012 G2 SSD Replacement: 步骤 2 中的图像 2,3 HP Elite x2 1012 G2 SSD Replacement: 步骤 2 中的图像 3,3
    • Remove the six 3mm Torx T5 screws underneath the kickstand.

  3. HP Elite x2 1012 G2 SSD Replacement: 步骤 3 中的图像 1,2 HP Elite x2 1012 G2 SSD Replacement: 步骤 3 中的图像 2,2
    • Turn the device over so the screen is facing you.

    • Place a suction cup firmly onto a corner of the screen.

    • Lift up gently until you see the screen separate from the casing.

    • Repeat this process for all four corners.

  4. HP Elite x2 1012 G2 SSD Replacement: 步骤 4 中的图像 1,1
    • Lift the screen up and off of the device.

    • Pry each corner up first, otherwise you may damage or crack the screen.

  5. HP Elite x2 1012 G2 SSD Replacement: 步骤 5 中的图像 1,3 HP Elite x2 1012 G2 SSD Replacement: 步骤 5 中的图像 2,3 HP Elite x2 1012 G2 SSD Replacement: 步骤 5 中的图像 3,3
    • Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently.

  6. HP Elite x2 1012 G2 SSD Replacement: 步骤 6 中的图像 1,2 HP Elite x2 1012 G2 SSD Replacement: 步骤 6 中的图像 2,2
    • Remove the screen by gently lifting it off of the device.

  7. HP Elite x2 1012 G2 SSD Replacement, SSD: 步骤 7 中的图像 1,1
    • Orient the device so that the battery is closest to you.

    • The battery is the large, black rectangle at the bottom of the device.

  8. HP Elite x2 1012 G2 SSD Replacement: 步骤 8 中的图像 1,2 HP Elite x2 1012 G2 SSD Replacement: 步骤 8 中的图像 2,2
    • Remove the single Phillips M2.0x2.0 screw on the SSD using a Phillips screwdriver. Turn the screwdriver counterclockwise to remove the screw.

  9. HP Elite x2 1012 G2 SSD Replacement: 步骤 9 中的图像 1,2 HP Elite x2 1012 G2 SSD Replacement: 步骤 9 中的图像 2,2
    • Gently pull the SSD to the left and up to remove it from the device.

结论

To reassemble your device, follow these instructions in reverse order.

12等其他人完成本指南。

Hunter Lane

于04/18/18注册

277 声望

撰写一个指南

团队

Cal Poly, Team S18-G5, Livingston Spring 2018 Cal Poly, Team S18-G5, Livingston Spring 2018 的会员

CPSU-LIVINGSTON-S18S18G5

4 名成员

创作了13篇指南

2条评论

Vielen Dank für die sehr gute Anleitung. Es hat alles perfekt geklappt.

Das Display selber sitzt zum Teil aber sehr fest im Gehäuse und man muss sich überwinden etwas Kraft anzuwenden.

Sollte man zu fest ziehen (und einem das Display entgegenspringt) besteht ja die Gefahr die filigranen Kabel abzureißen.

Andreas Gerl - 回复

Mein Lüfter läuft ständig. Sollte die Wärmeleitpaste eingetrocknet sein?

Der Experte - 回复

添加评论

浏览统计数据:

过去 24 小时: 11

过去 7 天: 66

过去 30 天: 271

总计 20,011