跳转到主内容

HP Elite x2 1012 G2 Rear Facing Camera Replacement

你所需要的

  1. HP Elite x2 1012 G2 Rear Facing Camera Replacement, Screen: 步骤 1 中的图像 1,1
    • Make sure the device is turned off before starting.

    • Orient the device so the back is facing you, with the kickstand up.

  2. HP Elite x2 1012 G2 Rear Facing Camera Replacement: 步骤 2 中的图像 1,3 HP Elite x2 1012 G2 Rear Facing Camera Replacement: 步骤 2 中的图像 2,3 HP Elite x2 1012 G2 Rear Facing Camera Replacement: 步骤 2 中的图像 3,3
    • Remove the six 3mm Torx T5 screws underneath the kickstand.

  3. HP Elite x2 1012 G2 Rear Facing Camera Replacement: 步骤 3 中的图像 1,2 HP Elite x2 1012 G2 Rear Facing Camera Replacement: 步骤 3 中的图像 2,2
    • Turn the device over so the screen is facing you.

    • Place a suction cup firmly onto a corner of the screen.

    • Lift up gently until you see the screen separate from the casing.

    • Repeat this process for all four corners.

  4. HP Elite x2 1012 G2 Rear Facing Camera Replacement: 步骤 4 中的图像 1,1
    • Lift the screen up and off of the device.

    • Pry each corner up first, otherwise you may damage or crack the screen.

  5. HP Elite x2 1012 G2 Rear Facing Camera Replacement: 步骤 5 中的图像 1,3 HP Elite x2 1012 G2 Rear Facing Camera Replacement: 步骤 5 中的图像 2,3 HP Elite x2 1012 G2 Rear Facing Camera Replacement: 步骤 5 中的图像 3,3
    • Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently.

  6. HP Elite x2 1012 G2 Rear Facing Camera Replacement: 步骤 6 中的图像 1,2 HP Elite x2 1012 G2 Rear Facing Camera Replacement: 步骤 6 中的图像 2,2
    • Remove the screen by gently lifting it off of the device.

  7. HP Elite x2 1012 G2 Rear Facing Camera Replacement, Rear Facing Camera: 步骤 7 中的图像 1,2 HP Elite x2 1012 G2 Rear Facing Camera Replacement, Rear Facing Camera: 步骤 7 中的图像 2,2
    • Locate the cameras at the top center of the power and processing unit.

    • Use a Phillips #00 screwdriver to remove the single 3 mm screw.

    • Use a spudger tool to lift up the ribbon cable clamps.

    • Be careful not to crease or damage the ribbon cables or connectors.

  8. HP Elite x2 1012 G2 Rear Facing Camera Replacement: 步骤 8 中的图像 1,2 HP Elite x2 1012 G2 Rear Facing Camera Replacement: 步骤 8 中的图像 2,2
    • Remove the front-facing camera.

    • Remove the metal bracket securing the rear-facing camera.

    • Remove the rear-facing camera.

结论

To reassemble your device, follow these instructions in reverse order.

WesleyEagleson

于04/06/19注册

431 声望

创作了3篇指南

团队

IUPUI, Team S13-G13, Wilson Spring 2019 IUPUI, Team S13-G13, Wilson Spring 2019 的会员

IUPUI-WILSON-S19S13G13

4 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 4

总计 492