简介

AC Adapters control the flow of electricity from the outlet to your device. Over time, they may fail. Ensure you have unplugged your device before you begin this repair.

  1. Open the the printer by lifting the top section. Make sure you're lifting from the lowest portion of the scanner section.
    • Open the the printer by lifting the top section. Make sure you're lifting from the lowest portion of the scanner section.

    添加评论

  2. Locate 13mm TR10 Torx Security screw behind screen and remove using Torx screwdriver.
    • Locate 13mm TR10 Torx Security screw behind screen and remove using Torx screwdriver.

    添加评论

    • Remove case covering by lifting it up to reveal the power cord.

    添加评论

    • Locate power cord.

    • Pull it out.

    添加评论

    • Locate 13mm TR10 Torx Security screw behind screen and remove with screwdriver.

    添加评论

    • Use a metal spudger around the edge to remove AC adapter cover.

    添加评论

    • Pull the AC adaptor up and out of its casing

    添加评论

    • Disconnect the wires from the AC adaptor.

    • Replace AC Adapter box. Reverse order of instructions for reassembly.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Justin

于2018年02月15日注册

161 信誉积分

撰写一个指南

团队

USF-Leahy-S18S1G1 USF-Leahy-S18S1G1 的会员

Community

3 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 3

过去的30天: 22

总计 183