简介

The panel is what holds the screen in place. Before removing the panel make sure the printer is unplugged.

配件

无需配件。

  1. Lift up printer screen.
    • Lift up printer screen.

  2. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  3. Use the Metal Spudger from the IFIXIT Toolkit to pry the left corner of the front panel. Slowly pry the front panel by sliding the Metal Spudger along the border of the front panel. Slowly pry the front panel by sliding the Metal Spudger along the border of the front panel.
    • Use the Metal Spudger from the IFIXIT Toolkit to pry the left corner of the front panel.

    • Slowly pry the front panel by sliding the Metal Spudger along the border of the front panel.

  4. Remove the front panel by lifting each corner up. Replace the front panel.
    • Remove the front panel by lifting each corner up.

    • Replace the front panel.

结论

To reassemble your device, follow these instructions in reverse order.

Elizabeth Surface

于2015年08月26日注册

1,386 信誉积分

创作了9篇指南

团队

USF Tampa, Team 4-6, Meier Fall 2015 USF Tampa, Team 4-6, Meier Fall 2015 的会员

USFT-MEIER-F15S4G6

4 名成员

创作了9篇指南

My HP Envy 5530 had a screw hidden beneath the label on the right side of the front panel. I used a knife to lift the label to access the screw.

rndymike - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 17

总计 294