简介

These steps must be followed before replacing any internal parts in the HP Deskjet 1000 J110a. Don't forget to keep track of the screws.

配件

无需配件。

Remove the two 13 mm screws located on the back of the printer using a screwdriver with the T10 torx bit (star-shaped).
  • Remove the two 13 mm screws located on the back of the printer using a screwdriver with the T10 torx bit (star-shaped).

添加评论

In the front of the printer, open the tray where the paper comes out and remove the two 13 mm screws located under the top of the printer.
  • In the front of the printer, open the tray where the paper comes out and remove the two 13 mm screws located under the top of the printer.

添加评论

  • With the front of the printer facing you, lift and raise the left side of the panel (like opening a book in reverse) until it disconnects from the clip on the right side of the panel.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Colin Tourjee

于2018年01月29日注册

473 信誉积分

创作了4篇指南

团队

USF Tampa, Team S5-G3, Passmore Spring 2018 USF Tampa, Team S5-G3, Passmore Spring 2018 的会员

USFT-PASSMORE-S18S5G3

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 14

总计 89