跳转到主内容

简介

To remove the touchpad, you must remove other components to get to it such as the keyboard.

  1. It is advised to work on the device only when it is powered off so as to avoid electrocution risks.
    • It is advised to work on the device only when it is powered off so as to avoid electrocution risks.

    • Turn off computer by pressing and holding the power button.

  2. Locate and unscrew the two screws on the back marked with a small keyboard. These screws hold the keyboard in place. Locate the metal hooks where the keyboard connects to the laptop and use a metal spudger to gently pry up the keyboard. Locate the metal hooks where the keyboard connects to the laptop and use a metal spudger to gently pry up the keyboard.
    • Locate and unscrew the two screws on the back marked with a small keyboard. These screws hold the keyboard in place.

    • Locate the metal hooks where the keyboard connects to the laptop and use a metal spudger to gently pry up the keyboard.

  3. Gently lift up and remove the keyboard.
    • Gently lift up and remove the keyboard.

  4. Locate the twenty 3 mm Phillips head screws.
    • Locate the twenty 3 mm Phillips head screws.

    • Unscrew them using the PH0 screwdriver.

  5. Remove the hard drive by pulling on the plastic tab and lifting upward.
    • Remove the hard drive by pulling on the plastic tab and lifting upward.

  6. Locate and unscrew the two Phillips head 3 mm screws on the wireless card.
    • Locate and unscrew the two Phillips head 3 mm screws on the wireless card.

  7. Unhook the two wires connecting to the wireless card by gently pulling them out.
    • Unhook the two wires connecting to the wireless card by gently pulling them out.

  8. Gently lift and pull out the card.
    • Gently lift and pull out the card.

  9. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  10. Locate the power button connector wire.
    • Locate the power button connector wire.

    • Using the tweezers, unhook the wire.

  11. Press and hold the lock to pop the panel piece above the keyboard and pull up to remove it. Press and hold the lock to pop the panel piece above the keyboard and pull up to remove it.
    • Press and hold the lock to pop the panel piece above the keyboard and pull up to remove it.

  12. Unplug the remaining wires using the tweezers. Unplug the remaining wires using the tweezers. Unplug the remaining wires using the tweezers.
    • Unplug the remaining wires using the tweezers.

  13. Gently pull out the three wires.
    • Gently pull out the three wires.

  14. Locate the four 3 mm Phillips head screws. Unscrew them using the PH0 screwdriver.
    • Locate the four 3 mm Phillips head screws.

    • Unscrew them using the PH0 screwdriver.

  15. Unhook the display connector wire.
    • Unhook the display connector wire.

  16. Gently disconnect the display by pulling it upwards.
    • Gently disconnect the display by pulling it upwards.

  17. Locate the disk drive on the side of the device.
    • Locate the disk drive on the side of the device.

    • Remove it by pulling it all the way out.

  18. Use the PH0 screwdriver to remove the two 3 mm Phillips head screws in the disk drive port.
    • Use the PH0 screwdriver to remove the two 3 mm Phillips head screws in the disk drive port.

  19. Disconnect the touchpad connection using the tweezers.
    • Disconnect the touchpad connection using the tweezers.

  20. Use the plastic opening tool to pry up all sides of the device cover.
    • Use the plastic opening tool to pry up all sides of the device cover.

  21. Remove the cover by lifting it.
    • Remove the cover by lifting it.

  22. Use the PH0 screwdriver to remove the six 1 mm Phillips head screws surrounding the touchpad
    • Use the PH0 screwdriver to remove the six 1 mm Phillips head screws surrounding the touchpad

  23. Use the tweezers to remove the touchpad  wire connection.
    • Use the tweezers to remove the touchpad wire connection.

  24. Use the plastic opening tool to pry up the touchpad cover. Lift and remove the touchpad cover.
    • Use the plastic opening tool to pry up the touchpad cover.

    • Lift and remove the touchpad cover.

  25. Use the blow dryer to melt the adhesive around the edge of the touchpad.
    • Use the blow dryer to melt the adhesive around the edge of the touchpad.

    • The touchpad is now free to be removed.

结论

To reassemble your device, follow these instructions in reverse order.

Taylor Johansen

于2016年10月20日注册

606 信誉积分

创作了5篇指南

团队

UMass Dartmouth, Team 5-6, Martin Fall 2016 UMass Dartmouth, Team 5-6, Martin Fall 2016 的会员

UMASSD-MARTIN-F16S5G6

3 名成员

创作了6篇指南

I need Compaq laptop c700 Touch pad

So how can I get it?

Suraj Verma - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 6

过去的30天: 14

总计 499