跳转到主内容

HP Chromebook 11-v011dx Key Board Replacement

你所需要的

  1. HP Chromebook 11-v011dx Key Board  Replacement, Key Board: 步骤 1 中的图像 1,3 HP Chromebook 11-v011dx Key Board  Replacement, Key Board: 步骤 1 中的图像 2,3 HP Chromebook 11-v011dx Key Board  Replacement, Key Board: 步骤 1 中的图像 3,3
    • Wedge the spudger between one of the black rubber caps on each of the four corners on the bottom of the HP Chromebook 11-v011dx.

    • Lift up the black rubber cap until it is completely removed.

    • Repeat this until all four of the black rubber caps are removed.

  2. HP Chromebook 11-v011dx Key Board  Replacement: 步骤 2 中的图像 1,2 HP Chromebook 11-v011dx Key Board  Replacement: 步骤 2 中的图像 2,2
    • Locate the two smaller black rubber caps on the top corners of the HP ChromeBook 11-v011dx. Wedge the spudger between one of them.

    • Lift up the small black rubber cap until it is completely off.

    • Repeat this step one more time to remove the other small black rubber cap on the other side.

  3. HP Chromebook 11-v011dx Key Board  Replacement: 步骤 3 中的图像 1,2 HP Chromebook 11-v011dx Key Board  Replacement: 步骤 3 中的图像 2,2
    • Locate the eleven screws on the bottom the HP ChromeBook. Six are located under the larger black rubber caps and the others are in different locations.

    • Use a Phillips #0 screwdriver to remove eleven 1.3mm screws.

  4. HP Chromebook 11-v011dx Key Board  Replacement: 步骤 4 中的图像 1,3 HP Chromebook 11-v011dx Key Board  Replacement: 步骤 4 中的图像 2,3 HP Chromebook 11-v011dx Key Board  Replacement: 步骤 4 中的图像 3,3
    • Make sure to do steps 1-3 or it will be impossible to lift up the key board and you may also do damage to the hardware.

    • Wedge the spudger between the key board and the bottom panel, carefully go around the keyboards edges gently.

    • Lift the spudger a little in the front of the keyboard until the key board lifts up.

    • With your hands, slowly and carefully lift the key board up.

  5. HP Chromebook 11-v011dx Key Board  Replacement: 步骤 5 中的图像 1,1
    • Locate the black tab that holds a wire in place that keeps the keyboard connected to the mother board.

    • Slowly unplug this wire that connects to the key board.

结论

To reassemble your device, follow these instructions in reverse order.

Kyle DeMello

于10/20/17注册

542 声望

创作了5篇指南

团队

UMass Dartmouth, Team S4-G2, Julie Fall 2017 UMass Dartmouth, Team S4-G2, Julie Fall 2017 的会员

UMASSD-JULIE-F17S4G2

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 5

总计 263