跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

This guide walks through the replacement of the HP Chromebook 11 G3’s touchpad. It will require the use of tweezers, a Phillips head screwdriver, and a spudger.

  1. Flip the laptop upside down so that the lid lies flat on the table. Remove the nine 6mm Phillips #00 screws that line the border.
    • Flip the laptop upside down so that the lid lies flat on the table.

    • Remove the nine 6mm Phillips #00 screws that line the border.

  2. Remove the two rubber feet closest to the hinge using tweezers. Remove the two 6mm Phillips #00 screws revealed under these rubber feet.
    • Remove the two rubber feet closest to the hinge using tweezers.

    • Remove the two 6mm Phillips #00 screws revealed under these rubber feet.

    • The rubber feet may tear while removal; preventing this can be difficult, but it won’t harm the laptop. If desired, replace these rubber feet during reassembly.

  3. Flip the laptop so it is in the upright position.
    • Flip the laptop so it is in the upright position.

    • Open the lid.

    • Unsnap the keyboard mount along the border of the laptop using a plastic opening tool.

    • This may require more force than expected. Hearing loud clicks as the plastic opening tool slides along the seam is normal.

  4. 任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装

    任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装
  5. Tilt the keyboard mount up. Use a spudger to flip up the two ZIF connector retaining flaps for the ribbon cables that connect the keyboard mount to the motherboard. Gently remove both ribbon cables.
    • Tilt the keyboard mount up.

    • Use a spudger to flip up the two ZIF connector retaining flaps for the ribbon cables that connect the keyboard mount to the motherboard.

    • Gently remove both ribbon cables.

  6. Lift the keyboard mount out of the laptop.
    • Lift the keyboard mount out of the laptop.

  7. Flip the keyboard mount upside down. Use tweezers to lift the tape on the bottom of the touchpad to expose the connector. With a spudger, push up the ZIF retaining flip.
    • Flip the keyboard mount upside down.

    • Use tweezers to lift the tape on the bottom of the touchpad to expose the connector.

    • With a spudger, push up the ZIF retaining flip.

    • Pull out the small ribbon cable.

  8. Remove the two Phillips #00 2mm screws that secure the touchpad to the black plastic housing. Flip the keyboard mount to the upright position.
    • Remove the two Phillips #00 2mm screws that secure the touchpad to the black plastic housing.

    • Flip the keyboard mount to the upright position.

    • From beneath, push the touchpad up through the top of the keyboard mount to remove it.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Rahul Goyal

于2017年04月26日注册

1,345 信誉积分

创作了10篇指南

团队

Cal Poly, Team S23-G3, Livingston Spring 2017 Cal Poly, Team S23-G3, Livingston Spring 2017 的会员

CPSU-LIVINGSTON-S17S23G3

4 名成员

创作了12篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 11

总计 651