跳转到主内容

HP Chromebook 11 G3 Display Assembly Replacement

你所需要的

  1. HP Chromebook 11 G3 Display Assembly Replacement, Keyboard Mount: 步骤 1 中的图像 1,2 HP Chromebook 11 G3 Display Assembly Replacement, Keyboard Mount: 步骤 1 中的图像 2,2
    • Flip the laptop upside down so that the lid lies flat on the table.

    • Remove the nine 6mm Phillips #00 screws that line the border.

  2. HP Chromebook 11 G3 Display Assembly Replacement: 步骤 2 中的图像 1,2 HP Chromebook 11 G3 Display Assembly Replacement: 步骤 2 中的图像 2,2
    • Remove the two rubber feet closest to the hinge using tweezers.

    • Remove the two 6mm Phillips #00 screws revealed under these rubber feet.

    • The rubber feet may tear while removal; preventing this can be difficult, but it won’t harm the laptop. If desired, replace these rubber feet during reassembly.

  3. HP Chromebook 11 G3 Display Assembly Replacement: 步骤 3 中的图像 1,1
    • Flip the laptop so it is in the upright position.

    • Open the lid.

    • Unsnap the keyboard mount along the border of the laptop using a plastic opening tool.

    • This may require more force than expected. Hearing loud clicks as the plastic opening tool slides along the seam is normal.

  4. HP Chromebook 11 G3 Display Assembly Replacement: 步骤 4 中的图像 1,3 HP Chromebook 11 G3 Display Assembly Replacement: 步骤 4 中的图像 2,3 HP Chromebook 11 G3 Display Assembly Replacement: 步骤 4 中的图像 3,3
    • Tilt the keyboard mount up.

    • Use a spudger to flip up the two ZIF connector retaining flaps for the ribbon cables that connect the keyboard mount to the motherboard.

    • Gently remove both ribbon cables.

  5. HP Chromebook 11 G3 Display Assembly Replacement: 步骤 5 中的图像 1,1
    • Lift the keyboard mount out of the laptop.

  6. HP Chromebook 11 G3 Display Assembly Replacement, Display Assembly: 步骤 6 中的图像 1,1
    • Gently tug on the black and white wires connected to the Wi-Fi module to disconnect them.

  7. HP Chromebook 11 G3 Display Assembly Replacement: 步骤 7 中的图像 1,2 HP Chromebook 11 G3 Display Assembly Replacement: 步骤 7 中的图像 2,2
    • Using a spudger, lift the ZIF retaining flap that secures the display’s ribbon cable to the motherboard.

    • Gently pull the ribbon cable out of its socket.

  8. HP Chromebook 11 G3 Display Assembly Replacement: 步骤 8 中的图像 1,1
    • Free the wire from the casing.

  9. HP Chromebook 11 G3 Display Assembly Replacement: 步骤 9 中的图像 1,1
    • Remove the two 6mm Phillips #00 screws located near the upper left and right corners of the hinge mounts.

    • Hold the lid so that it is folded slightly inwards while removing the screws so that the lid doesn’t fall.

  10. HP Chromebook 11 G3 Display Assembly Replacement: 步骤 10 中的图像 1,1
    • Rotate the lid to a 90-degree angle with the table.

    • Shimmy the lid out of the laptop.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Rahul Goyal

于04/26/17注册

1,369 声望

创作了10篇指南

团队

Cal Poly, Team S23-G3, Livingston Spring 2017 Cal Poly, Team S23-G3, Livingston Spring 2017 的会员

CPSU-LIVINGSTON-S17S23G3

4 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 6

总计 1,465