简介
This guide walks through removing the display assembly and opening the screen bezel. It requires removing the keyboard mount. It requires using a Phillips head screwdriver, a plastic opening tool, and a spudger to finish removal.
你所需要的
-
-
Flip the laptop upside down so that the lid lies flat on the table.
-
Remove the nine 6mm Phillips #00 screws that line the border.
-
-
-
-
Gently tug on the black and white wires connected to the Wi-Fi module to disconnect them.
-
-
-
Use the plastic opening tool to pry the left and right side of the top of the lid, and proceed inwards from the sides.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.