修复你的物品 社区 商店

HP 15-ba0709dx Back Cover Replacement

简介

Follow this guide to remove the back cover on HP 15-ba0709dx laptop. This guide is a prerequisite to practically every repair and replacement that this laptop requires.

你所需要的

  1. HP 15-ba0709dx Back Cover Replacement, Battery: 步骤 1 中的图像 1，1

    • Flip the device over and locate the battery compartment.

    • Slide the battery release latch on the left and right side until the battery is detached from its slot.

    • A noticeable pop will be heard when the battery is fully released.

    编辑

  2. HP 15-ba0709dx Back Cover Replacement: 步骤 2 中的图像 1，1

    • Pull the battery out of its slot.

    • Be careful not to damage any of the connectors in the process.

    编辑

  3. HP 15-ba0709dx Back Cover Replacement, Back Cover: 步骤 3 中的图像 1，1

    • Place the laptop on a clean, flat surface with the bottom side facing up.

    编辑

  5. HP 15-ba0709dx Back Cover Replacement: 步骤 4 中的图像 1，1

    • Using a Phillips Head Screwdriver, remove the screws anchoring the bottom casing.

    • Note: Make sure to keep track of the screws once they have been removed.

    编辑

  6. HP 15-ba0709dx Back Cover Replacement: 步骤 5 中的图像 1，1

    • Locate the screws about 1 inch from the battery release tabs and use a Phillips Head Screwdriver to remove these screws.

    • Note:Place these newly removed screws with the ones removed in Step 2.

    编辑

  7. HP 15-ba0709dx Back Cover Replacement: 步骤 6 中的图像 1，2 HP 15-ba0709dx Back Cover Replacement: 步骤 6 中的图像 2，2

    • Locate the rubber friction pads on the top corners of the laptop. Pry the pads from the laptop and place them off to the side

    • Removing the friction pads will reveal two more anchoring screws.

    • Note: The adhesive keeping the pads on the laptop will weaken once doing this, but it is necessary to removing the bottom cover of the laptop.

    编辑

  8. HP 15-ba0709dx Back Cover Replacement: 步骤 7 中的图像 1，1

    • Remove disc reader.

    • Note: If all screws are removed it should slide out easily.

    编辑

  9. HP 15-ba0709dx Back Cover Replacement: 步骤 8 中的图像 1，2 HP 15-ba0709dx Back Cover Replacement: 步骤 8 中的图像 2，2

    • Use a plastic prod to pry the back cover off the laptop.

    • Be careful not to damage the laptop while prying.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与6其他贡献者

Lydia Brown

于03/20/17注册

369 声望

创作了2篇指南

徽章: 11

+ 8更多徽章

团队

Texas Tech, Team S13-G3, Bennett Spring 2017 Texas Tech, Team S13-G3, Bennett Spring 2017 的会员

TTU-BENNETT-S17S13G3

5 名成员

创作了5篇指南

2条评论

Make sure to use a very thin shim, but strong enough to pry.

spotty118 - 回复

thanks- also worked for 15-ba053nr

Renee Brandt - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 5

过去 30 天： 10

总计 1,887