修复你的物品 社区 商店

HP 15-ay052nr USB Port Replacement

简介

This is a guide on removing and replacing an additional USB port that is not attached to the motherboard. The other USB ports that are on the motherboard have to be replaced with a new motherboard or with advanced soldering skills.

你所需要的

  1. HP 15-ay052nr USB Port Replacement, Battery: 步骤 1 中的图像 1，1

    • To protect the device and yourself, make sure your device is completely powered down before disassembling. Disconnect all external devices before starting any tear down process.

    • Turn the device and lay it upside-down on a flat surface so the base of the computer is facing upwards.

    编辑

  2. HP 15-ay052nr USB Port Replacement: 步骤 2 中的图像 1，1

    • Identify the two (2) sliding lock mechanisms on either side of the battery and slide them towards the center.

    • The sliders are located at the back of the device on the side where the display hinges are.

    • The slider closest to the optical drive (CD reader) clicks open but the opposite slider has a spring.

    编辑

  3. HP 15-ay052nr USB Port Replacement: 步骤 3 中的图像 1，1

    • Pull the battery slightly up and out to remove.

    • If the battery doesn't pop out, the sliders weren't pushed in far enough. Push the sliders towards the center until the battery pops out.

    编辑

  4. HP 15-ay052nr USB Port Replacement, Bottom Cover: 步骤 4 中的图像 1，1

    • Remove the rubber feet on the bottom of the device to access all the screws.

    • There are two rubber feet, one on each side of the battery compartment.

    编辑

  6. HP 15-ay052nr USB Port Replacement: 步骤 5 中的图像 1，1

    • Unscrew the twelve 9 mm JIS #0 screws on the back of the device.

    • Gently remove the optical drive (CD reader) to more easily separate the base.

    编辑

  7. HP 15-ay052nr USB Port Replacement: 步骤 6 中的图像 1，1

    • Unclip the keyboard surface from the base using an iFixit opening tool around the entire border.

    编辑

  8. HP 15-ay052nr USB Port Replacement: 步骤 7 中的图像 1，1

    • Separate the base of the computer from the component assembly.

    • The optical drive can be placed in the base where it corresponds to prevent misplacing it.

    编辑

  9. HP 15-ay052nr USB Port Replacement, USB Port: 步骤 8 中的图像 1，1

    • Remove the three 3mm JIS #0 screws from the hard drive.

    编辑

  10. HP 15-ay052nr USB Port Replacement: 步骤 9 中的图像 1，1

    • Unplug the hard drive and set aside.

    编辑

  11. HP 15-ay052nr USB Port Replacement: 步骤 10 中的图像 1，1

    • Disconnect the cable that is attached to the motherboard from the USB board.

    • The motherboard can be identified as the big blue board in the opposite side of the USB board we are replacing.

    编辑

  12. HP 15-ay052nr USB Port Replacement: 步骤 11 中的图像 1，1

    • Remove the single 3mm JIS #0 screw.

    • Once the screw is out, the USB board can be pulled out for replacement.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 6

总计 327