HP 14-ac151nr DC Power Jack Replacement - iFixit 维修指南

简介

If your computer won't charge and you have already ruled out a defunct charger, you can try replacing the power jack using these steps.

你所需要的

步骤 1 Backplate

HP 14-ac151nr DC Power Jack Replacement, Backplate: 步骤 1 中的图像 1，1

Remove battery by pushing the two buttons inward.

步骤 2

HP 14-ac151nr DC Power Jack Replacement: 步骤 2 中的图像 1，1

Remove the two rubber feet next to the battery.

步骤 3

HP 14-ac151nr DC Power Jack Replacement: 步骤 3 中的图像 1，1

Remove all 14 Phillips head #0 screws.

步骤 4

HP 14-ac151nr DC Power Jack Replacement: 步骤 4 中的图像 1，1

Use a plastic opener tool to pry off the black backplate.

步骤 5 DC Power Jack

HP 14-ac151nr DC Power Jack Replacement, DC Power Jack: 步骤 5 中的图像 1，2

HP 14-ac151nr DC Power Jack Replacement, DC Power Jack: 步骤 5 中的图像 2，2

Remove the black tape near the power jack.
Remove the screws connecting monitor to the bottom of the computer.

步骤 6

HP 14-ac151nr DC Power Jack Replacement: 步骤 6 中的图像 1，1

Position the metal fittings attached to the monitor out of the way.
The monitor is still attached by wires — be careful not to pull on it too hard.

步骤 7

HP 14-ac151nr DC Power Jack Replacement: 步骤 7 中的图像 1，3

HP 14-ac151nr DC Power Jack Replacement: 步骤 7 中的图像 2，3

HP 14-ac151nr DC Power Jack Replacement: 步骤 7 中的图像 3，3

Disconnect the power jack from the motherboard.
Remove the power jack by lifting it up.
An opener tool may make this easier.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与1其他贡献者

Antonio Leonti

于10/26/18注册

410 声望

创作了3篇指南

+ 6更多徽章

团队

UMass Dartmouth, Team S1-G7, Simcock Fall 2018 UMass Dartmouth, Team S1-G7, Simcock Fall 2018 的会员

UMASSD-SIMCOCK-F18S1G7

3 名成员

创作了6篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 8

总计 426