跳转到主内容

HKC P774A Digitizer Replacement

你所需要的

  1. HKC P774A Digitizer Replacement, Digitizer: 步骤 1 中的图像 1,3 HKC P774A Digitizer Replacement, Digitizer: 步骤 1 中的图像 2,3 HKC P774A Digitizer Replacement, Digitizer: 步骤 1 中的图像 3,3
    • Insert the flat end of the spudger into the side of the device

    • This will create a gap between the device and screen housing.

    • Insert the plastic opening tool into this gap and move it along this gap.

    • Make sure not to bent the digitizer during this step.

    • The screen housing and device will now be separated.

  2. HKC P774A Digitizer Replacement: 步骤 2 中的图像 1,3 HKC P774A Digitizer Replacement: 步骤 2 中的图像 2,3 HKC P774A Digitizer Replacement: 步骤 2 中的图像 3,3
    • Once the digitizer has been been removed from the body, disconnect the digitizer band from the motherboard.

    • Two small black pins (circled in red) will need to be unlocked.

    • Unlock the pins by pulling them outward with the tweezers.

    • Make sure the pins are released entirely before attempting to remove the band.

    • Remove the band using the tweezers.

  3. HKC P774A Digitizer Replacement: 步骤 3 中的图像 1,3 HKC P774A Digitizer Replacement: 步骤 3 中的图像 2,3 HKC P774A Digitizer Replacement: 步骤 3 中的图像 3,3
    • Once the digitizer has been disconnected from the motherboard, the LCD screen must be removed from the digitizer.

    • Push open the tabs (circled in red) using the flat end of the plastic spudger.

    • Be sure not to bend the digitizer while prying.

    • Continue to release all tabs while continuing to pry the LCD away from the digitizer.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Sean McCauley

于10/26/15注册

512 声望

创作了4篇指南

团队

Montana Tech, Team 10-1, Shirk Fall 2015 Montana Tech, Team 10-1, Shirk Fall 2015 的会员

MTUM-SHIRK-F15S10G1

4 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 1

总计 156