修复你的物品 社区 商店

Grundig TK125 Transport Belts Replacement

简介

These 6 steps explain to remove bottom and top covers.. at the bottom side remove the plate (2 screws) which hold the flywheel axle.. this is your opening to replace the 2 belts, forst the biggest belt for the flywheel, the the midsize belt for the drive.. all good..

  1. Grundig TK125 Transport Belts Replacement, Transport Belts: 步骤 1 中的图像 1，2 Grundig TK125 Transport Belts Replacement, Transport Belts: 步骤 1 中的图像 2，2

    • I have ordered a new belt set on aliepxress, to be continued once i received them

    编辑

  2. Grundig TK125 Transport Belts Replacement: 步骤 2 中的图像 1，1

    • These are the 3 belts needed (if all) for the TK125, the biggest is needed for the flywheel, the midsize of for the drive and the smallest of for the counter.

    编辑

  4. Grundig TK125 Transport Belts Replacement: 步骤 3 中的图像 1，2 Grundig TK125 Transport Belts Replacement: 步骤 3 中的图像 2，2

    • Now remove the bottom and the top covers so you can reach both sides of the recorder

    编辑

  5. Grundig TK125 Transport Belts Replacement: 步骤 4 中的图像 1，2 Grundig TK125 Transport Belts Replacement: 步骤 4 中的图像 2，2

    • Remove the flywheel axle restplate, here is your opening to replace both the belts

    编辑

  6. Grundig TK125 Transport Belts Replacement: 步骤 5 中的图像 1，1

    • first you place the large flywheel belt, then you place the midsize belt for the drive

    编辑

  7. Grundig TK125 Transport Belts Replacement: 步骤 6 中的图像 1，1

    • this is the small belt for the counter

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Joenymus

于03/09/24注册

148 声望

撰写一个指南

徽章: 3

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 16