简介
Use this guide to replace the LED on your Graco Secure Coverage Digital Baby Monitor for nursery unit.
The LED replacement includes the LED and battery replacement.
你所需要的
-
-
Remove the 9mm screw from the battery cover of the nursery unit using a Phillips #1 tip screwdriver.
-
-
-
-
Remove the two 9mm Phillips #1 screws from the rare case of the device.
-
Place the screws in a secure place.
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.