Graco Literider Classic Connect Handle Cover Replacement

简介

This guide shows how to locate the screws on the handle cover and remove them to allow the handle cover to come off. This is only necessary if there is a problem in collapsing the stroller.

你所需要的

步骤 1 Handle Cover

Graco Literider Classic Connect Handle Cover Replacement, Handle Cover: 步骤 1 中的图像 1，1

Flip the stroller over so that the screws on the handle are facing upwards.
Locate the four 22 mm Phillips screws on the underside of the handle.

编辑

步骤 2

Using a Phillips #1 screwdriver, remove the four 22 mm screws and set them aside.

编辑

步骤 3

Push the switch in to allow the handle cover to come free.

编辑

步骤 4

Remove the handle cover from the handle.
Avoid pushing the two rods fully into the slots on the handle, as they can be very difficult to remove.

编辑

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与2其他贡献者

Tyler Laird

于09/29/15注册

540 声望

创作了3篇指南

徽章: 8

+ 5更多徽章

团队

Cal Poly, Team 11-4, Forte Fall 2015 Cal Poly, Team 11-4, Forte Fall 2015 的会员

CPSU-FORTE-F15S11G4

5 名成员

创作了3篇指南

Graco Literider Classic Connect Handle Cover Replacement

简介

你所需要的

步骤 1 Handle Cover

添加评论

步骤 2

添加评论

步骤 3

添加评论

步骤 4

添加评论

作者

Tyler Laird

团队

Cal Poly, Team 11-4, Forte Fall 2015 Cal Poly, Team 11-4, Forte Fall 2015 的会员

0条评论

添加评论

嵌入本指南

预览