简介

Replacing the harness for the GoPro camera is fairly easy. We will tell you how to remove the stabilizer which holds the harness, how to remove camera from the harness, and how to replace the harness itself.

配件

无需配件。

Locate stabilizer collar’s unlock and lock symbols. Twist the collar counterclockwise to unlock the stabilizer from GoPro Karma body.
  • Locate stabilizer collar’s unlock and lock symbols. Twist the collar counterclockwise to unlock the stabilizer from GoPro Karma body.

  • Place the GoPro Karma on a stable surface with the legs folded in and the stabilizer facing towards yourself.

添加评论

Remove the stabilizer by pulling the entire stabilizer out of the drone body.
  • Remove the stabilizer by pulling the entire stabilizer out of the drone body.

添加评论

  • Place finger on the tab to open the harness and remove the camera.

  • Be sure to pull the camera straight out lest you damage the connectors.

添加评论

  • Using a Hex 2.0mm screwdriver, remove the two 12 mm hex screws closest to the harness.

添加评论

  • Pull the harness off of the stabilizer.

  • Be sure to pull the harness straight off lest you damage the connector.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Max Verspieren

于2018年04月19日注册

97 信誉积分

撰写一个指南

团队

Cal Poly, Team S25-G14, Maness Spring 2018 Cal Poly, Team S25-G14, Maness Spring 2018 的会员

CPSU-MANESS-S18S25G14

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 4

过去的30天: 18

总计 137