修复你的物品 社区 商店

GoPro Hero4 Black Midframe Housing Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. GoPro Hero4 Black Midframe Housing Replacement, Midframe Housing: 步骤 1 中的图像 1，3 GoPro Hero4 Black Midframe Housing Replacement, Midframe Housing: 步骤 1 中的图像 2，3 GoPro Hero4 Black Midframe Housing Replacement, Midframe Housing: 步骤 1 中的图像 3，3

    • Remove the faceplate by carefully prying around the edge using a plastic opening tool. Loosen the clips on the edge, then pull the faceplate off.

    • Use the tweezers to lift the faceplate from the rest of the device.

    • The power button on the front of the GoPro may pop off. Ensure to align it properly during reassembly.

    翻译

  2. GoPro Hero4 Black Midframe Housing Replacement: 步骤 2 中的图像 1，2 GoPro Hero4 Black Midframe Housing Replacement: 步骤 2 中的图像 2，2

    • Using a #00 Phillips head screwdriver, remove the following screws:

    • One 4.6 mm screw

    • Three 8.2 mm screws

    • Two 6.1 mm screws

    翻译

  4. GoPro Hero4 Black Midframe Housing Replacement: 步骤 3 中的图像 1，2 GoPro Hero4 Black Midframe Housing Replacement: 步骤 3 中的图像 2，2

    • Insert a metal spudger between the back plastic housing and the camera board assembly. Working around the edge to be careful of the inner components, carefully remove the camera.

    翻译

  5. GoPro Hero4 Black Midframe Housing Replacement: 步骤 4 中的图像 1，3 GoPro Hero4 Black Midframe Housing Replacement: 步骤 4 中的图像 2，3 GoPro Hero4 Black Midframe Housing Replacement: 步骤 4 中的图像 3，3

    • Using tweezers, remove the ribbon strip by pulling on it. This will remove the connection.

    • Push down on the three wires with the metal spudger and the clip will disconnect from the motherboard.

    • The clip must be pulled up and away from the motherboard. Attempting to slide it out will damage the clip.

    • During reassembly, remove the black tape on the ribbon cable, turn the camera upside down so you can see the port, and reinsert the cable with tweezers. It's a lot easier!

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Thomas Sullivan

于02/20/17注册

589 声望

创作了3篇指南

徽章: 12

+ 9更多徽章

团队

USF Tampa, Team S2-G1, Sullivan Spring 2017 USF Tampa, Team S2-G1, Sullivan Spring 2017 的会员

USFT-SULLIVAN-S17S2G1

4 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 55