修复你的物品 社区 商店

GoPro Hero 3 Silver Expansion Port Replacement

你所需要的

  1. GoPro Hero 3 Silver Expansion Port Replacement, Battery: 步骤 1 中的图像 1，2 GoPro Hero 3 Silver Expansion Port Replacement, Battery: 步骤 1 中的图像 2，2

    • Pull back on the tab on the back of GoPro to open the battery cover.

    翻译

  2. GoPro Hero 3 Silver Expansion Port Replacement: 步骤 2 中的图像 1，1

    • Pull the battery out using the tab.

    翻译

  3. GoPro Hero 3 Silver Expansion Port Replacement, Expansion Port: 步骤 3 中的图像 1，2 GoPro Hero 3 Silver Expansion Port Replacement, Expansion Port: 步骤 3 中的图像 2，2

    • Use the plastic opening tool to remove the faceplate.

    • There is some adhesive and clips so be careful and the faceplate should pop right off.

    翻译

  5. GoPro Hero 3 Silver Expansion Port Replacement: 步骤 4 中的图像 1，2 GoPro Hero 3 Silver Expansion Port Replacement: 步骤 4 中的图像 2，2

    • Now that the faceplate is off, it is time to remove the 4 screws on each corner.

    • Use the T4 tool bit from the iFixit toolkit in order to remove the 4 screws on each corner.

    翻译

  6. GoPro Hero 3 Silver Expansion Port Replacement: 步骤 5 中的图像 1，2 GoPro Hero 3 Silver Expansion Port Replacement: 步骤 5 中的图像 2，2

    • Note: Make sure you remove the door cover of the USB, mini HDMI, and SD port before. Separating the motherboard will be easier.

    • Using the plastic opening tool, slowly pry open the motherboard assembly.

    翻译

  7. GoPro Hero 3 Silver Expansion Port Replacement: 步骤 6 中的图像 1，2 GoPro Hero 3 Silver Expansion Port Replacement: 步骤 6 中的图像 2，2

    • Use the spudger to gently pry off the connector of the housing to the motherboard.

    • You should now have the motherboard assembly and the housing separated.

    翻译

  8. GoPro Hero 3 Silver Expansion Port Replacement: 步骤 7 中的图像 1，3 GoPro Hero 3 Silver Expansion Port Replacement: 步骤 7 中的图像 2，3 GoPro Hero 3 Silver Expansion Port Replacement: 步骤 7 中的图像 3，3

    • Use the spudger to remove the heat shield tape and detach the image sensor from the motherboard.

    • Using the T4 Torx toolbit, remove the 4 screws that connect the sensor to the lens.

    • Remove the silver connector of the image sensor from the motherboard using the spudger to pry it off.

    翻译

  9. GoPro Hero 3 Silver Expansion Port Replacement: 步骤 8 中的图像 1，2 GoPro Hero 3 Silver Expansion Port Replacement: 步骤 8 中的图像 2，2

    • The media adapter is attached to the motherboard via 3 screws:

    • x1 T4 Torx

    • x2 Phillips #00

    • There is a little silver bracket (in the yellow circle) that is held down by the Phillips #00 screw so be careful not to lose it.

    翻译

  10. GoPro Hero 3 Silver Expansion Port Replacement: 步骤 9 中的图像 1，2 GoPro Hero 3 Silver Expansion Port Replacement: 步骤 9 中的图像 2，2

    • With a little prying, use the spudger to detach the media adapter's connector from the motherboard.

    • Remove the media adapter from the motherboard.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与4其他贡献者

Brian Alvarez

于04/02/15注册

1,439 声望

创作了6篇指南

徽章: 15

+ 12更多徽章

团队

Cal Poly, Team 24-7, Lancaster Spring 2015 Cal Poly, Team 24-7, Lancaster Spring 2015 的会员

CPSU-LANCASTER-S15S24G7

3 名成员

创作了21篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 6

总计 1,843