简介

There are many benefits to repairing your own watch such as cheaper than replacing the whole watch or taking it to a jeweler, and maintaining the sentimental value when repairing it yourself. No prior technical experience is required, just a little patience and literacy!

Place the watch in the band holder.
  • Place the watch in the band holder.

  • Make sure to align the band pin directly over one of the holes.

添加评论

Use your pin push and rubber mallet to knock it through.
  • Use your pin push and rubber mallet to knock it through.

添加评论

  • Use your pliers to pull the pin the rest of the way through.

添加评论

  • Repeat steps 1-3 on the other side to fully release the old clasp from the watch.

添加评论

  • Slide the pin back in halfway, then reattach both sides of your new clasp to your watch.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Caleb Shuford

于2018年02月22日注册

121 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 14

总计 65