修复你的物品 社区 商店

General Wire Drain Cleaner RSVD 2014 Front Assembly Replacement

简介

Use this guide to remove or replace the front assembly on the General Wire Drain Cleaner RSVD 2014.

你所需要的

  1. General Wire Drain Cleaner RSVD 2014 Front Assembly Replacement, Remove the cable end cover: 步骤 1 中的图像 1，2 General Wire Drain Cleaner RSVD 2014 Front Assembly Replacement, Remove the cable end cover: 步骤 1 中的图像 2，2

    • Turn off the drain cleaner and disconnect it from power before beginning any maintenance.

    • Slide the rubber cable cover off of the end of the cable.

    编辑

  3. General Wire Drain Cleaner RSVD 2014 Front Assembly Replacement, Loosen the front assembly screws: 步骤 2 中的图像 1，1

    • Use a flathead screwdriver to loosen the three screws around the edge of the front assembly.

    编辑

  4. General Wire Drain Cleaner RSVD 2014 Front Assembly Replacement, Remove the front assembly: 步骤 3 中的图像 1，3 General Wire Drain Cleaner RSVD 2014 Front Assembly Replacement, Remove the front assembly: 步骤 3 中的图像 2，3 General Wire Drain Cleaner RSVD 2014 Front Assembly Replacement, Remove the front assembly: 步骤 3 中的图像 3，3

    • Pull the front assembly off of the drain cleaner and slide it over the cable to remove it.

    • During reassembly, make sure the three screws on the front assembly line up with the slots on both the metal cable container back and the plastic cable container.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

Adam O'Camb

于04/11/15注册

196,587 声望

创作了416篇指南

徽章: 39

+ 36更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 6

过去 30 天： 29

总计 1,046