修复你的物品 社区 商店

General Wire Drain Cleaner RSVD 2014 Cable Replacement

简介

Use this guide to replace the cable in a General Wire Drain Cleaner RSVD 2014.

你所需要的

  1. General Wire Drain Cleaner RSVD 2014 Cable Replacement, Remove the cable end cover: 步骤 1 中的图像 1，2 General Wire Drain Cleaner RSVD 2014 Cable Replacement, Remove the cable end cover: 步骤 1 中的图像 2，2

    • Turn off the drain cleaner and disconnect it from power before beginning any maintenance.

    • Slide the rubber cable cover off of the end of the cable.

    编辑

  2. General Wire Drain Cleaner RSVD 2014 Cable Replacement, Loosen the front assembly screws: 步骤 2 中的图像 1，1

    • Use a flathead screwdriver to loosen the three screws around the edge of the front assembly.

    编辑

  4. General Wire Drain Cleaner RSVD 2014 Cable Replacement, Remove the front assembly: 步骤 3 中的图像 1，3 General Wire Drain Cleaner RSVD 2014 Cable Replacement, Remove the front assembly: 步骤 3 中的图像 2，3 General Wire Drain Cleaner RSVD 2014 Cable Replacement, Remove the front assembly: 步骤 3 中的图像 3，3

    • Pull the front assembly off of the drain cleaner and slide it over the cable to remove it.

    • During reassembly, make sure the three screws on the front assembly line up with the slots on both the metal cable container back and the plastic cable container.

    编辑

  5. General Wire Drain Cleaner RSVD 2014 Cable Replacement, Remove the cable container: 步骤 4 中的图像 1，2 General Wire Drain Cleaner RSVD 2014 Cable Replacement, Remove the cable container: 步骤 4 中的图像 2，2

    • Slide the plastic cable container out of the metal container back.

    编辑

  6. General Wire Drain Cleaner RSVD 2014 Cable Replacement, Remove the cable: 步骤 5 中的图像 1，3 General Wire Drain Cleaner RSVD 2014 Cable Replacement, Remove the cable: 步骤 5 中的图像 2，3 General Wire Drain Cleaner RSVD 2014 Cable Replacement, Remove the cable: 步骤 5 中的图像 3，3

    • Pull the cable out of the plastic cable container.

    • During reassembly, make sure to insert the end of the cable with the hook (as shown in the third photo) first, then coil the rest of the cable into the container in a counter-clockwise fashion.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

Adam O'Camb

于04/11/15注册

196,587 声望

创作了416篇指南

徽章: 39

+ 36更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 4

过去 7 天： 16

过去 30 天： 69

总计 2,509