修复你的物品 社区 商店

General Pipe Cleaners Drain Cleaner PMEBO 2016 Upper Feed Roller Bearing Replacement

简介

Use this guide to replace the upper feed roller bearing in a General Pipe Cleaners Drain Cleaner PMEBO 2016.

你所需要的

  1. General Pipe Cleaners Drain Cleaner PMEBO 2016 Upper Feed Roller Bearing Replacement, Upper Feed Roller Bearing: 步骤 1 中的图像 1，1

    • Before you begin, make sure the drain cleaner is disconnected from power.

    • Use your hand to unscrew and remove the feed pressure knob.

    编辑

  2. General Pipe Cleaners Drain Cleaner PMEBO 2016 Upper Feed Roller Bearing Replacement: 步骤 2 中的图像 1，1

    • Use a 1/4 inch socket wrench to remove the three bolts securing the feed roller holder plate.

    编辑

  3. General Pipe Cleaners Drain Cleaner PMEBO 2016 Upper Feed Roller Bearing Replacement: 步骤 3 中的图像 1，1

    • Remove the feed roller holder plate.

    编辑

  5. General Pipe Cleaners Drain Cleaner PMEBO 2016 Upper Feed Roller Bearing Replacement: 步骤 4 中的图像 1，1

    • Use a 3/16 inch hex wrench to remove the top swing pin.

    编辑

  6. General Pipe Cleaners Drain Cleaner PMEBO 2016 Upper Feed Roller Bearing Replacement: 步骤 5 中的图像 1，3 General Pipe Cleaners Drain Cleaner PMEBO 2016 Upper Feed Roller Bearing Replacement: 步骤 5 中的图像 2，3 General Pipe Cleaners Drain Cleaner PMEBO 2016 Upper Feed Roller Bearing Replacement: 步骤 5 中的图像 3，3

    • Use pliers to lift out and remove the pressure spring plate.

    • Lift out and remove the pressure spring.

    编辑

  7. General Pipe Cleaners Drain Cleaner PMEBO 2016 Upper Feed Roller Bearing Replacement: 步骤 6 中的图像 1，2 General Pipe Cleaners Drain Cleaner PMEBO 2016 Upper Feed Roller Bearing Replacement: 步骤 6 中的图像 2，2

    • Use pliers to lift the top carrier straight up and out of the feed body.

    • During reassembly, make sure that the carrier is oriented so that its threaded hole lines up with the swing pin hole in the feed body.

    • During reassembly, clean the carrier and apply new grease before inserting it into the feed body.

    编辑

  8. General Pipe Cleaners Drain Cleaner PMEBO 2016 Upper Feed Roller Bearing Replacement: 步骤 7 中的图像 1，1

    • Use a 3/16 inch hex wrench to remove the feed roller shaft.

    • It may be necessary to insert a thin screwdriver or hex wrench into the top end of the carrier to help hold the carrier while you loosen the feed roller shaft.

    编辑

  9. General Pipe Cleaners Drain Cleaner PMEBO 2016 Upper Feed Roller Bearing Replacement: 步骤 8 中的图像 1，1

    • Remove the upper feed roller assembly, including the fiber disks on either side of it.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

Adam O'Camb

于04/11/15注册

197,108 声望

创作了416篇指南

徽章: 39

+ 36更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 3

过去 7 天： 5

过去 30 天： 17

总计 832