修复你的物品 社区 商店

General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement

简介

Use this guide to replace the reverse switch on a General Pipe Cleaners Drain Cleaner EJB 2014.

你所需要的

  1. General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement, Reverse Switch: 步骤 1 中的图像 1，1

    • Before you begin, make sure the drain cleaner is disconnected from power.

    • Use a Phillips #2 driver to remove the two screws securing the control box cover.

    编辑

  2. General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement: 步骤 2 中的图像 1，1

    • Remove the control box cover.

    编辑

  3. General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement: 步骤 3 中的图像 1，1

    • Use a 9/16 inch deep socket and ratchet to remove the nut securing the reverse switch.

    编辑

  5. General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement: 步骤 4 中的图像 1，2 General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement: 步骤 4 中的图像 2，2

    • Remove the reverse switch guard.

    编辑

  6. General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement: 步骤 5 中的图像 1，2 General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement: 步骤 5 中的图像 2，2

    • Squeeze the tabs on either side of the reverse switch connector.

    • Pull the two halves of the connector apart to disconnect it.

    • Take note of where everything is connected in the control box before disconnecting anything else.

    编辑

  7. General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement: 步骤 6 中的图像 1，2 General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement: 步骤 6 中的图像 2，2

    • Pull the white cable straight off of its spade connector on the power switch diaphragm.

    编辑

  8. General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement: 步骤 7 中的图像 1，2 General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement: 步骤 7 中的图像 2，2

    • Pull the black cable straight off of its spade connector on the power switch diaphragm.

    编辑

  9. General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement: 步骤 8 中的图像 1，3 General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement: 步骤 8 中的图像 2，3 General Pipe Cleaners Drain Cleaner EJB 2014 Reverse Switch Replacement: 步骤 8 中的图像 3，3

    • Slide the switch assembly down out of its hole in the control box and pull it out of the control box.

    • Be careful not to snag the switch on any cables during removal.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

Adam O'Camb

于04/11/15注册

196,764 声望

创作了416篇指南

徽章: 39

+ 36更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 3

过去 7 天： 7

过去 30 天： 34

总计 974