修复你的物品 社区 商店

General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement

简介

Use this guide to replace the motor assembly in a General Pipe Cleaners Drain Cleaner EJB 2014.

你所需要的

  1. General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement, Motor Assembly: 步骤 1 中的图像 1，1

    • Before you begin, make sure the drain cleaner is disconnected from power.

    • Loosen the belt guard knob enough to be able to slide the belt guard toward the front of the drain cleaner.

    编辑

  2. General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement: 步骤 2 中的图像 1，1

    • Slide the belt guard toward the front of the drain cleaner and off of the motor.

    编辑

  4. General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement: 步骤 3 中的图像 1，3 General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement: 步骤 3 中的图像 2，3 General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement: 步骤 3 中的图像 3，3

    • Push down on the motor to take tension off of the belt.

    • The motor mount is spring-loaded to keep tension on the belt.

    • Lift the belt off of the motor pulley and remove it from the motor.

    编辑

  5. General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement: 步骤 4 中的图像 1，2 General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement: 步骤 4 中的图像 2，2

    • Use two 1/2 inch wrenches to remove the four nut and bolt sets securing the motor to the drain cleaner.

    • During reassembly, make sure that the belt pulley on the motor is lined up with the belt groove on the cage before tightening the bolts.

    编辑

  6. General Pipe Cleaners Drain Cleaner EJB 2014 Motor Assembly Replacement: 步骤 5 中的图像 1，1

    • Remove the motor assembly.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

Adam O'Camb

于04/11/15注册

196,761 声望

创作了416篇指南

徽章: 39

+ 36更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 8

过去 30 天： 60

总计 2,011