修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

General Electric Bagel Switch 4-Slice Power Supply Replacement

简介

This guide will explain how to replace the power supply cable of the General Electric Bagel Switch 4-Slice toaster.

你所需要的

  1. General Electric Bagel Switch 4-Slice Power Supply Replacement, Disassembling General Electric Bagel Switch 4-Slice Toaster Outer Case: 步骤 1 中的图像 1，1

    • Unplug the toaster from the electrical outlet.

    翻译

  2. General Electric Bagel Switch 4-Slice Power Supply Replacement: 步骤 2 中的图像 1，2 General Electric Bagel Switch 4-Slice Power Supply Replacement: 步骤 2 中的图像 2，2

    • Remove the two levers and four dials by pulling them out directly towards you.

    • Removing these components may require some force, but they will release.

    翻译

  3. General Electric Bagel Switch 4-Slice Power Supply Replacement: 步骤 3 中的图像 1，1

    • Look for the plastic clips on the back side of the toaster.

    • Disconnect the small plastic clips on the back of the toaster. Use Philips head Screwdriver to do this step.

    • Now, carefully remove the toaster casing.

    翻译

  4. General Electric Bagel Switch 4-Slice Power Supply Replacement, Power Supply: 步骤 4 中的图像 1，1

    • Flip the toaster over so that the bottom plate is facing up.

    翻译

  6. General Electric Bagel Switch 4-Slice Power Supply Replacement: 步骤 5 中的图像 1，2 General Electric Bagel Switch 4-Slice Power Supply Replacement: 步骤 5 中的图像 2，2

    • Remove the four screws from the bottom of the toaster.

    翻译

    • Carefully separate the bottom plate from the metal components inside the toaster.

    翻译

  8. General Electric Bagel Switch 4-Slice Power Supply Replacement: 步骤 7 中的图像 1，1

    • Using wire cutters, cut the power supply cable close to the base of the toaster, leave about 2 inches of wire.

    翻译

  9. General Electric Bagel Switch 4-Slice Power Supply Replacement: 步骤 8 中的图像 1，1

    • Pull the power supply cord through the bottom plate of the toaster.

    翻译

    • Insert the end of the new power supply cable through the hole in the bottom plate.

    翻译

  11. General Electric Bagel Switch 4-Slice Power Supply Replacement: 步骤 10 中的图像 1，1

    • Strip about an inch of the wire insulation (casing) off the ends of both the new power supply cable, and the old power supply cable that is still attached to the toaster.

    翻译

    • Splice the stripped ends of wire together using a wire cap.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与8其他贡献者

Ron Gajdos

于10/16/13注册

307 声望

创作了3篇指南

徽章: 7

+ 4更多徽章

团队

UMass Dartmouth, Team 4-4, Vijaybhaskar Fall 2013 UMass Dartmouth, Team 4-4, Vijaybhaskar Fall 2013 的会员

UMASSD-VIJAYBHASKAR-F13S4G4

3 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 484