跳转到主内容

简介

The shell on the RC Mustang GT is mostly a cosmetic component, giving the car the unique appearance associated with GEAR'D UP's RC cars. The following steps will show how to replace the shell of the car.

配件

没有特定配件。

  1. Flip the car over and remove the four 5mm Phillips #0 screws that hold the shell to the car chassis. Flip the car over and remove the four 5mm Phillips #0 screws that hold the shell to the car chassis.
    • Flip the car over and remove the four 5mm Phillips #0 screws that hold the shell to the car chassis.

  2. Flip the car over again to its upright position and vertically lift the shell from the car.
    • Flip the car over again to its upright position and vertically lift the shell from the car.

    • During re-assembly, make sure the shell is correctly aligned. If it is not aligned correctly, it may rub on the wheels, possibly preventing them from turning.

结论

To reassemble your device, follow these instructions in reverse order.

Claudia Robinson

于2015年02月01日注册

419 信誉积分

创作了3篇指南

团队

Cal Poly, Team 8-38, Amido Winter 2015 Cal Poly, Team 8-38, Amido Winter 2015 的会员

CPSU-AMIDO-W15S8G38

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 153