Gateway Solo 1200 Fan Replacement

简介

Follow this replacement guide to replace a faulty keyboard and damaged frame.

Your Gateway Solo 1200’s fan is an integral part of the cooling system. If your laptop feels unusually warm or powers off suddenly, the fan might not be providing enough cool air to the system. Without a clean or working fan, your laptop can overheat and cause permanent damage to the internal components.

你所需要的

步骤 1 Battery

Gateway Solo 1200 Fan Replacement, Battery: 步骤 1 中的图像 1，3

Gateway Solo 1200 Fan Replacement, Battery: 步骤 1 中的图像 2，3

Gateway Solo 1200 Fan Replacement, Battery: 步骤 1 中的图像 3，3

Turn off your laptop and disconnect it from AC Adapter before use.
Locate the battery latch on the bottom of the laptop.
Release the latch by pressing it with your thumb and sliding it to the right.
Slide the battery out of its compartment.
Discharge your laptop by pushing the power button after removing the battery.

编辑

步骤 2 Keyboard and Frame

Gateway Solo 1200 Fan Replacement, Keyboard and Frame: 步骤 2 中的图像 1，2

Gateway Solo 1200 Fan Replacement, Keyboard and Frame: 步骤 2 中的图像 2，2

Turn the device so the back is facing you.
Unscrew the 2 mm screws with a Phillips #0 screwdriver.
Unscrewing these back screws partially releases the keyboard.

编辑

步骤 3

Open up the device so the keyboard is visible.
Locate the front panel with the power button above the keyboard.
Remove the panel by gently pulling on it.
The panel should pop out with little force.

编辑

步骤 4

Gateway Solo 1200 Fan Replacement: 步骤 4 中的图像 3，3

Gently lift the keyboard panel up.
Flip the keyboard panel over to reveal the underside.
Gently tug on the ribbon cable at the bottom of the keyboard panel to release the keyboard.

编辑

步骤 5

Gateway Solo 1200 Fan Replacement: 步骤 5 中的图像 3，3

Remove both monitor hinge covers at the base of the screen by unscrewing the 2 mm screws with a Phillips #0 screwdriver.
Locate the visual output cord on the exposed left hinge connecting the monitor to the laptop.
Gently tug on the visual output cord to remove the screen.

编辑

步骤 6

Gateway Solo 1200 Fan Replacement: 步骤 6 中的图像 3，3

Once the screen is removed, locate the keyboard frame screws.
Unscrew the outer frame and gently pull it away from the device.
Gently tug on the trackpad connector underneath the keyboard frame to completely remove it.