1. The first thing you need to do is remove the panel concealing the wireless card, by taking out the screws.
    • The first thing you need to do is remove the panel concealing the wireless card, by taking out the screws.

  2. Locate the wireless card on the right side of the now removed panel.
    • Locate the wireless card on the right side of the now removed panel.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Remove the screws in the two possible locations.
    • Remove the screws in the two possible locations.

  5. After removing the screws, gently pull upwards on the end of the wireless card until it is angled as shown.
    • After removing the screws, gently pull upwards on the end of the wireless card until it is angled as shown.

  6. Pull the card diretly outward from its socket, all while being mindful of the connected wires.
    • Pull the card diretly outward from its socket, all while being mindful of the connected wires.

    • Remove the wired connections by gently pulling them diretly away from the card. Please remember where each one was connected, it will be useful for reconnecting

    • Reconnect wires to new wireless card and screw back into place.

结论

To reassemble your device, follow these instructions in reverse order.

Shawn Cabral

于2014年03月12日注册

463 信誉积分

创作了4篇指南

团队

UMass Dartmouth, Team 5-4, Cichon Spring 2014 UMass Dartmouth, Team 5-4, Cichon Spring 2014 的会员

UMASSD-CICHON-S14S5G4

3 名成员

创作了4篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 410