修复你的物品 社区 商店

Gateway MS2370 RAM Replacement

简介

This guide shows the user how to properly remove the RAM from the Gateway MS2370 Laptop.

你所需要的

  1. Gateway MS2370 RAM Replacement, Battery: 步骤 1 中的图像 1，1

    • Make sure the laptop is turned off and flipped over so that the bottom is facing up. Then, locate the battery clip as shown.

    编辑

  2. Gateway MS2370 RAM Replacement: 步骤 2 中的图像 1，1

    • Either using your fingers or a plastic spudger push the battery clip to the left to release battery.

    编辑

  3. Gateway MS2370 RAM Replacement: 步骤 3 中的图像 1，1

    • Pull the battery from the laptop to remove it.

    编辑

  4. Gateway MS2370 RAM Replacement, RAM: 步骤 4 中的图像 1，1

    • Unscrew the three 10mm inch Phillips 01 screws on the back of your laptop.

    • Unplug everything from the USB and SD ports.

    编辑

  5. Gateway MS2370 RAM Replacement: 步骤 5 中的图像 1，1

    • Remove the cover panel.

    • This exposes more screws that must be removed.

    编辑

  7. Gateway MS2370 RAM Replacement: 步骤 6 中的图像 1，1

    • Unplug the two exposed cables from the motherboard.

    编辑

  8. Gateway MS2370 RAM Replacement: 步骤 7 中的图像 1，2 Gateway MS2370 RAM Replacement: 步骤 7 中的图像 2，2

    • Unscrew the rest of the case screws which include several 10mm 01 Phillips screws and three 3mm 00 Phillips screws.

    • This marked screw will not fully come out. Just loosen it and leave it there it will not effect the rest of the replacement.

    编辑

  9. Gateway MS2370 RAM Replacement: 步骤 8 中的图像 1，2 Gateway MS2370 RAM Replacement: 步骤 8 中的图像 2，2

    • Pry the laptop case apart.

    • The disc drive in this photo was removed. You can remove it just by puling it out when the previous step is completed.

    编辑

  10. Gateway MS2370 RAM Replacement: 步骤 9 中的图像 1，1

    • Unplug the track-pad and the keyboard ribbon cable by lifting up the grey flap and removing the cable.

    • This cable has a special connector the requires you to lift open a grey flap to unplug properly.

    • The keyboard plug is located at the center of the motherboard and can be unplugged like a normal cable.

    编辑

  11. Gateway MS2370 RAM Replacement: 步骤 10 中的图像 1，1

    • Remove the top half of the case.

    编辑

  12. Gateway MS2370 RAM Replacement: 步骤 11 中的图像 1，1

    • Unscrew all 5 10mm inch Phillips 01 screws.

    • One more off screen

    编辑

  13. Gateway MS2370 RAM Replacement: 步骤 12 中的图像 1，3 Gateway MS2370 RAM Replacement: 步骤 12 中的图像 2，3 Gateway MS2370 RAM Replacement: 步骤 12 中的图像 3，3

    • Unplug the ribbon cable connected to the USB Hub, the network card, and the monitor cable.

    编辑

  14. Gateway MS2370 RAM Replacement: 步骤 13 中的图像 1，1

    • Flip the motherboard over.

    编辑

  15. Gateway MS2370 RAM Replacement: 步骤 14 中的图像 1，3 Gateway MS2370 RAM Replacement: 步骤 14 中的图像 2，3 Gateway MS2370 RAM Replacement: 步骤 14 中的图像 3，3

    • Using your two thumbs to pull outwards from the inside of the RAM slot to release and remove the RAM.

    • The last step of this replacement guide is not required to complete the fan replacement guide.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与2其他贡献者

Mathieu Bolduc-Clayton

于10/17/17注册

518 声望

创作了4篇指南

徽章: 10

+ 7更多徽章

团队

UMass Dartmouth, Team S1-G5, Simcock Fall 2017 UMass Dartmouth, Team S1-G5, Simcock Fall 2017 的会员

UMASSD-SIMCOCK-F17S1G5

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 2

过去 30 天： 15

总计 1,549