修复你的物品 社区 商店

Garmin vívofit 2 Batteries Replacement

简介

This guide will explain how to replace the batteries of the Garmin vívofit 2 device. A Phillips #00 screwdriver and two replacement CR1632 Batteries will be needed. The process is straightforward and there are no hazards involved.

你所需要的

  1. Garmin vívofit 2 Batteries Replacement, Wristband: 步骤 1 中的图像 1，2 Garmin vívofit 2 Batteries Replacement, Wristband: 步骤 1 中的图像 2，2

    • Carefully peel back the wristband so the bottom of the device is facing you. Then, pull out the device from one side (on the short edge) and take the device out of the wrist band.

    编辑

  2. Garmin vívofit 2 Batteries Replacement, Batteries: 步骤 2 中的图像 1，1

    • Remove the four 3.8mm Phillips #00 screws holding the device together.

    编辑

  4. Garmin vívofit 2 Batteries Replacement: 步骤 3 中的图像 1，1

    • With the screws removed from the device, take the cover off the top of the device, revealing the batteries inside.

    编辑

  5. Garmin vívofit 2 Batteries Replacement: 步骤 4 中的图像 1，1

    • With the cover removed, take out the two batteries currently in the device. Take note of which side of the battery is facing which way in the device. Battery removal can usually be accomplished with your fingers. If not, carefully use a nylon spudger to pull up one edge of the battery, allowing you to remove that battery.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

James Hickey

于03/26/18注册

290 声望

创作了2篇指南

徽章: 7

+ 4更多徽章

团队

IUPUI, Team S1-G2, Harley Spring 2018 IUPUI, Team S1-G2, Harley Spring 2018 的会员

IUPUI-HARLEY-S18S1G2

7 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 10

总计 3,374