跳转到主内容

修复你的物品

维修的权力

商店

  1. Using a T5 Torx Screwdriver, begin unscrewing the  four 11.0 mm  screws from the back panel. Using a T5 Torx Screwdriver, begin unscrewing the  four 11.0 mm  screws from the back panel.
    • Using a T5 Torx Screwdriver, begin unscrewing the four 11.0 mm screws from the back panel.

  2. Using a plastic opening tool or similar object, find the groove in the side of the device and begin prying open the back panel. Work the tool around the entire panel until it pops off.
    • Using a plastic opening tool or similar object, find the groove in the side of the device and begin prying open the back panel. Work the tool around the entire panel until it pops off.

  3. Lift the beige clamp using a tweezer or your fingernail and remove the connector.
    • Lift the beige clamp using a tweezer or your fingernail and remove the connector.

  4. Lift the connector gently from the socket, making sure you pull in the right direction.
    • Lift the connector gently from the socket, making sure you pull in the right direction.

  5. 跳过升级

    通过使用多合一工具包维修可以节省成本。

    购买 iPhone 维修工具套装

    跳过升级

    通过使用多合一工具包维修可以节省成本。

    购买 iPhone 维修工具套装
  6. Lift and separate the speaker connector cable using a pair of tweezers.
    • Lift and separate the speaker connector cable using a pair of tweezers.

  7. Gently lift the speaker out of the back cover using a plastic opening tool.
    • Gently lift the speaker out of the back cover using a plastic opening tool.

    • Apply force as needed if there is glue holding the speaker in place.

  8. Using a pair of tweezers, grab the connecting wires and lift the terminal from the motherboard.
    • Using a pair of tweezers, grab the connecting wires and lift the terminal from the motherboard.

    • Avoid contacting battery terminals with metallic objects.

  9. Pry the battery out of the back cover using a plastic opening tool.
    • Pry the battery out of the back cover using a plastic opening tool.

    • Work the edges and apply force when removing the battery, as it will be glued down.

  10. Using a T5 Torx Screwdriver, unscrew the 5 screws holding the motherboard in place.
    • Using a T5 Torx Screwdriver, unscrew the 5 screws holding the motherboard in place.

  11. Tilt and slide the motherboard out of the back cover.
    • Tilt and slide the motherboard out of the back cover.

结论

To reassemble your device, follow these instructions in reverse order.

Ricardo Audain

于2016年09月07日注册

599 信誉积分

创作了5篇指南

团队

USF Tampa, Team 6-4, Remmell Fall 2016 USF Tampa, Team 6-4, Remmell Fall 2016 的会员

USFT-REMMELL-F16S6G4

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 280