简介

Before you begin disassembling the device, be sure the power is off.

Wedge a plastic opening tool in between the outer frame and the rear panel assembly.
  • Wedge a plastic opening tool in between the outer frame and the rear panel assembly.

  • Pry the outer frame off the perimeter of the rear panel assembly.

  • The cover will easily pop off.

添加评论

Remove the four #00 Phillips screws securing the front case assembly to the rear case assembly.
  • Remove the four #00 Phillips screws securing the front case assembly to the rear case assembly.

  • Carefully lift, but do not completely separate, the front case assembly from the rear case assembly.

  • Be extremely cautious when separating both halves, as the rear case assembly is still attached to the front case assembly via a few connectors.

添加评论

  • Gently pull the battery cable connector from its socket on the motherboard.

  • The second connector can remain attached to the motherboard, but be careful not to break the connector while handling both halves of the device.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Andrew Burman

于2012年01月18日注册

1 信誉积分

撰写一个指南

团队

Cal Poly, Team 11-19, Maness Winter 2012 Cal Poly, Team 11-19, Maness Winter 2012 的会员

CPSU-MANESS-W12S11G19

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 1,273