Use a plastic spudger tool to remove the plastic frame.
  • Use a plastic spudger tool to remove the plastic frame.

  • Insert the tool into the groove in the center of the top of the outer frame and lever it gently until it pops out.

添加评论

Use a phillips head screw driver to remove all four screws in the corners around the screen.
  • Use a phillips head screw driver to remove all four screws in the corners around the screen.

  • Set the screws aside for later.

添加评论

  • Gently pull from both ends to separate the front panel from the back.

  • Do not force the pieces apart wider than the length of the connecting wires or you will damage the wiring.

添加评论

  • Locate the white wire clip. Gently unplug it using either your fingers or tweezers.

添加评论

  • Carefully expose both halves of the device.

  • Be sure to not pull the two halves apart too hard to avoid damaging the black wire.

添加评论

结论

Your device should be ready to use once more.

2等其他人完成本指南。

Adrian Leon

于2010年10月07日注册

169 信誉积分

创作了3篇指南

团队

Cal Poly, Team 22-1, Maness Fall 2010 Cal Poly, Team 22-1, Maness Fall 2010 的会员

CPSU-MANESS-F10S22G1

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 4

总计 1,775