Garmin Nuvi 2797LMT Speaker Replacement - iFixit 维修指南

简介

This guide will teach you step by step how to replace your speaker.

你所需要的

步骤 1 Speaker

Garmin Nuvi 2797LMT Speaker Replacement, Speaker: 步骤 1 中的图像 1，1

Before you begin make sure to turn off your GPS.
Using your T-6 Torx Screwdriver, unscrew the ten 2.38 mm torx T-6 screws from the back of your GPS.

步骤 2

Garmin Nuvi 2797LMT Speaker Replacement: 步骤 2 中的图像 1，3

Garmin Nuvi 2797LMT Speaker Replacement: 步骤 2 中的图像 2，3

Garmin Nuvi 2797LMT Speaker Replacement: 步骤 2 中的图像 3，3

Using the biggest plastic opening tool, pry open the GPS from the sides. You should now be able to see everything inside the GPS.
Be careful when opening the GPS because of the ribbon attached to the screen. It can tear easily.

步骤 3

Garmin Nuvi 2797LMT Speaker Replacement: 步骤 3 中的图像 1，1

Locate the speaker's wire connector plugged into the motherboard. Now delicately detach the speaker connector by pulling directly up.

步骤 4

Garmin Nuvi 2797LMT Speaker Replacement: 步骤 4 中的图像 1，1

Now using the nylon or metal spudger, carefully pry the glue away from the sides of the speaker.
The speaker has been attached with strong glue so you will need to use a little bit of force when prying it out. Also be careful while using the nylon or metal spudger so you don't get hurt and the device doesn't get damaged.

步骤 5

Garmin Nuvi 2797LMT Speaker Replacement: 步骤 5 中的图像 1，2

Garmin Nuvi 2797LMT Speaker Replacement: 步骤 5 中的图像 2，2

Now using the plastic opening tool, pry the speaker up from one of the sides. Your speaker will completely come out of the device.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

Wanda Martinez

于10/13/15注册

248 声望

撰写一个指南

+ 4更多徽章

团队

Sam Houston State, Team 2-6, Blackburne Fall 2015 Sam Houston State, Team 2-6, Blackburne Fall 2015 的会员

SHSU-BLACKBURNE-F15S2G6

3 名成员

创作了4篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 302