简介
A faulty battery can cause the device to not power on or take a charge. Replace it.
你所需要的
-
-
Remove the stand by pushing down on the tab and pulling the round, plastic piece away from the Garmin unit.
-
-
Plug the new battery into the same plug, with the wires going the same direction.
Test the unit by powering it on.
If it powers on stick the new battery in place with any glue or tape.
Snap the casing back together and replace the 4 screws, again with a T5 bit.
Plug the new battery into the same plug, with the wires going the same direction.
Test the unit by powering it on.
If it powers on stick the new battery in place with any glue or tape.
Snap the casing back together and replace the 4 screws, again with a T5 bit.
6等其他人完成本指南。