简介

This device can be identified utilizing the criterion on the device page. When replacing the screen, be sure to set aside the following tools: T5 Torx screwdriver and plastic opening tool.

  1. Carefully remove model/serial number sticker.
    • Carefully remove model/serial number sticker.

    添加评论

  2. Remove two 4mm T5 Torx screws located under the sticker.
    • Remove two 4mm T5 Torx screws located under the sticker.

    添加评论

    • Once the screws are removed, use the plastic opening tool to carefully separate the body from the screen encasing.

    添加评论

    • Once the body of the nüvi is separated, carefully flip the tabs on the motherboard that secure the ribbon cable to the motherboard and disconnect.

    添加评论

    • Use a plastic opening tool to loosen the three clips located on the top of the screen encasing to a position that loosens the hold on the screen.

    添加评论

    • Use a plastic opening tool to loosen the two clips on the short sides of the Nuvi screen encasing to a position that allows the removal of the screen.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Hunter Johnson

于2018年03月27日注册

315 信誉积分

创作了2篇指南

团队

IUPUI, Team S3-G5, Harley Spring 2018 IUPUI, Team S3-G5, Harley Spring 2018 的会员

IUPUI-HARLEY-S18S3G5

3 名成员

创作了2篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 3

总计 109