跳转到主内容

修复你的物品

维修的权力

商店

简介

If your power button is defective, replace the old one with the new power button.

  1. Remove the barcode sticker at the bottom of the device.
    • Remove the barcode sticker at the bottom of the device.

  2. Remove two 8.4 mm T5 screws from the bottom of the device.
    • Remove two 8.4 mm T5 screws from the bottom of the device.

  3. 打开所有标签

    Mac的RAM升级套装

    购买套装

    所有选项卡都有足够的 RAM

    购买套装
  4. Using a plastic opening tool, carefully pry open the device. Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.
    • Using a plastic opening tool, carefully pry open the device.

    • Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.

  5. Remove the power button. Remove the power button.
    • Remove the power button.

结论

To reassemble your device, follow these instructions in reverse order.

Timothy

于2012年01月26日注册

57 信誉积分

创作了3篇指南

团队

Cal Poly, Team 9-3, Regan Winter 2012 Cal Poly, Team 9-3, Regan Winter 2012 的会员

CPSU-REGAN-W12S9G3

5 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 11

总计 9,429