修复你的物品 社区 商店

Garmin Nuvi 2557LMT Battery Replacement

简介

The tools needed are a T5 Torx screwdriver and a plastic opening tool. The battery is glued to the back of the device and connected to the motherboard with a wire.

你所需要的

  1. Garmin Nuvi 2557LMT Battery Replacement, Garmin Nuvi 2557LMT Disassembly: 步骤 1 中的图像 1，1

    • Using a T5 Torx screwdriver, remove four 6 mm screws from the four corners of the back of the device.

    编辑

  2. Garmin Nuvi 2557LMT Battery Replacement: 步骤 2 中的图像 1，1

    • Grip the device with your hands. Using your thumbs pull the nameplate towards yourself and off the device.

    编辑

  4. Garmin Nuvi 2557LMT Battery Replacement: 步骤 3 中的图像 1，1

    • There is a visible separation between the front and the back of the device.

    • Using a plastic opening tool, pry open the device along this separation.

    • Trying to open the device on the opposite side will rip the motherboard-display connector.

    编辑

  5. Garmin Nuvi 2557LMT Battery Replacement: 步骤 4 中的图像 1，2 Garmin Nuvi 2557LMT Battery Replacement: 步骤 4 中的图像 2，2

    • Carefully pull apart the device by opening it up on the opposite side of the nameplate.

    编辑

  6. Garmin Nuvi 2557LMT Battery Replacement, Battery: 步骤 5 中的图像 1，1

    • Using a plastic opening tool pry the battery away from the device.

    • The battery might be glued, so it might require a little bit of force to get it out.

    编辑

  7. Garmin Nuvi 2557LMT Battery Replacement: 步骤 6 中的图像 1，1

    • Pull the battery-motherboard connector away from the motherboard.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

2条评论

On my Nuvi 2557, the silver name bezel is part of the front cover - it does not separate. I just split the case as shown.

The battery connector pulls out perpendicular to the pc board, and you re-insert it by aligning and pressing down against the board.

john horn - 回复

Would this apply to the Nuvi 2555LMT?

Bill Hines - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 5

总计 1,204