简介

Replacing the speaker in a Garmin Nuvi 200.

  1. Peel off the sticker from the bottom of the device to reveal two screws.
    • Peel off the sticker from the bottom of the device to reveal two screws.

    添加评论

  2. Remove two T5 Torx screws.
    • Remove two T5 Torx screws.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Insert a plastic opening tool in the gap between the front and rear casing.

    • Carefully work the tool around the gap, separating the two halves of the case.

      • Keep the power switch in place while removing the rear case.

    添加评论

    • Unscrew the two screws on opposite sides of the speaker using the #00 Phillips screwdriver.

    there is no use showing how to replace a speaker in nuvi if we cant find any

    seems like a god dam mistery

    Jean Michel Tche - 回复

    • Pull the cable out to detach the speaker from the logic board.

    添加评论

    • Wedge the iPod opener into the space between the speaker and the case.

    • Apply pressure to pry the speaker away from the case.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Anjelica

于2010年04月11日注册

504 信誉积分

创作了3篇指南

团队

Cal Poly, Team 25-90, Amido Spring 2010 Cal Poly, Team 25-90, Amido Spring 2010 的会员

CPSU-AMIDO-S10S25G90

4 名成员

创作了9篇指南

just a note i had a problem with the speaker in my nuvi 200 an upon opening up found speaker plug had come loose i guess from being dropped a few times pushed plug in an works fine please check all connections before replacing your speaker saved me $$ thanks for a great site everyone...

randaleholland - 回复

Where can you buy replacement speakers for the Garmin units?

Brat Fry - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 9

总计 6,474