跳转到主内容

简介

Prerequisite only: This guide will show you how to remove the frame of the Garmin Nuvi 1490T.

配件

没有特定配件。

  1. Power off your GPS before moving on.
    • Power off your GPS before moving on.

    • Locate the crevice that separates the frame from the body.

  2. Carefully insert the plastic prying tool into the crevice to separate the frame from the body.
    • Carefully insert the plastic prying tool into the crevice to separate the frame from the body.

    • Applying excessive force can lead to a damaged or scratched display screen.

  3. Slide the plastic prying tool around the perimeter to completely remove the frame. Slide the plastic prying tool around the perimeter to completely remove the frame.
    • Slide the plastic prying tool around the perimeter to completely remove the frame.

  4. After removing first frame your GPS should look like this
    • After removing first frame your GPS should look like this

  5. Remove the four 11.0 mm screws using the Torx T5 screwdriver. Remove the four 11.0 mm screws using the Torx T5 screwdriver. Remove the four 11.0 mm screws using the Torx T5 screwdriver.
    • Remove the four 11.0 mm screws using the Torx T5 screwdriver.

  6. Using the plastic prying tool, dislodge the  frame from the body of the device. Using your hands, completely disconnect the frame from the body. Set the pieces of the frame aside.
    • Using the plastic prying tool, dislodge the frame from the body of the device.

    • Using your hands, completely disconnect the frame from the body.

    • Set the pieces of the frame aside.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Ricardo Solis

于2016年01月20日注册

974 信誉积分

创作了6篇指南

团队

USF Tampa, Team 15-2, Remmell Spring 2016 USF Tampa, Team 15-2, Remmell Spring 2016 的会员

USFT-REMMELL-S16S15G2

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 46