简介

This guide will give you all the necessary steps to change your old motherboard for a new one.

  1. Remove the five 7mm screws with H1.3 hex screwdriver.
    • Remove the five 7mm screws with H1.3 hex screwdriver.

  2. Use a plastic opening tool to remove the face of the device to expose the inner components.
    • Use a plastic opening tool to remove the face of the device to expose the inner components.

      • There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well.

      • Be careful of the ribbon that connects the motherboard to the display.

    • Disconnect this ribbon from the motherboard using tweezers.

    • Using a T5 screwdriver, remove the two 5mm screws.

      • The motherboard should move freely.

    • Another ribbon is attached from the underside of the motherboard. Disconnect this ribbon.

    • Disconnect wires connecting battery to motherboard.

    • The battery is glued to the motherboard and will need pried off with a nylon spudger.

    • Now attach battery to new motherboard and reassemble.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Jacob Smiley

于2018年03月26日注册

205 信誉积分

撰写一个指南

团队

IUPUI, Team S1-G6, Harley Spring 2018 IUPUI, Team S1-G6, Harley Spring 2018 的会员

IUPUI-HARLEY-S18S1G6

3 名成员

创作了2篇指南

And where would one source replacement motherboard?

jonathan.hatchuel - 回复

浏览统计数据:

过去的24小时: 6

过去的7天: 39

过去的30天: 143

总计 949