简介

This guide will give you step-by-step instructions on how to quickly swap out that old battery for a new one.

Remove the five 7mm screws with H1.3 hex screwdriver.
  • Remove the five 7mm screws with H1.3 hex screwdriver.

Why is a H1.3 being used here when the screws look like TORX?

Stuart Kerr - 回复

Use a plastic opening tool to remove the face of the device to expose the inner components.
  • Use a plastic opening tool to remove the face of the device to expose the inner components.

    • There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well.

    • Be careful with the ribbon that connects the motherboard to the display.

添加评论

  • Proceed to disconnect the ribbon from the motherboard using tweezers.

添加评论

  • Using a T5 screwdriver, remove the two 5mm screws.

    • The motherboard should now move freely.

添加评论

  • Another ribbon is attached to the top of the motherboard. Disconnect this ribbon.

添加评论

  • Disconnect wires connecting battery to motherboard.

添加评论

  • The battery is glued to the motherboard and will need pried off using the nylon spudger.

添加评论

  • Now attach the new battery with adhesive and reassemble.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Victor Tanguy

于2018年03月26日注册

261 信誉积分

撰写一个指南

团队

IUPUI, Team S1-G6, Harley Spring 2018 IUPUI, Team S1-G6, Harley Spring 2018 的会员

IUPUI-HARLEY-S18S1G6

3 名成员

创作了2篇指南

添加评论

浏览统计数据:

过去的24小时: 18

过去的7天: 156

过去的30天: 662

总计 2,131