修复你的物品 社区 商店

Garmin Approach S2 Motherboard Replacement

简介

Be very careful when handling connector wires, as they are incredibly easily broken. This guide is unique only in removing the circuit board from the screen.

你所需要的

  1. Garmin Approach S2 Motherboard Replacement, Back Cover: 步骤 1 中的图像 1，2 Garmin Approach S2 Motherboard Replacement, Back Cover: 步骤 1 中的图像 2，2

    • Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.

    编辑

  2. Garmin Approach S2 Motherboard Replacement: 步骤 2 中的图像 1，1

    • Remove the back cover carefully.

    • Even after the screws have been removed, the back cover can still be quite difficult to take off. Moderate to extensive prying may be required. Be gentle, but firm.

    编辑

  3. 注意：步骤 3 源自标记为进行中的 指南。

    Garmin Approach S2 Motherboard Replacement, Water Proof Gasket: 步骤 3 中的图像 1，1

    • Remove the orange gasket.

    编辑

  4. Garmin Approach S2 Motherboard Replacement, Screen: 步骤 4 中的图像 1，1

    • Remove the screen and motherboard assembly from the case.

    编辑

  6. Garmin Approach S2 Motherboard Replacement: 步骤 5 中的图像 1，1

    • Use a metal spudger to remove the golden retaining clip from the screen. There will be some adhesive to break.

    编辑

  7. Garmin Approach S2 Motherboard Replacement: 步骤 6 中的图像 1，1

    • Remove the screen from the golden metal clip.

    编辑

  8. Garmin Approach S2 Motherboard Replacement: 步骤 7 中的图像 1，1

    • Unhinge the black retaining hinge by prying it open with the metal spudger; Your fingernails will work as well.

    编辑

  9. Garmin Approach S2 Motherboard Replacement: 步骤 8 中的图像 1，2 Garmin Approach S2 Motherboard Replacement: 步骤 8 中的图像 2，2

    • Remove the connector from the motherboard by pulling it free at the base.

    • Make sure to pull from the base of the connector wire, as it is very easy to rip the wire from the screen.

    编辑

  10. Garmin Approach S2 Motherboard Replacement: 步骤 9 中的图像 1，1

    • Remove the screen from the motherboard.

    • Notice our tape retaining the connector to the screen. This is so easy to rip!

    编辑

  11. Garmin Approach S2 Motherboard Replacement, Motherboard: 步骤 10 中的图像 1，1

    • Remove the motherboard from the screen.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Evan Miller

于03/21/18注册

250 声望

创作了2篇指南

徽章: 6

+ 3更多徽章

团队

IUPUI, Team S4-G1, Baechle Spring 2018 IUPUI, Team S4-G1, Baechle Spring 2018 的会员

IUPUI-BAECHLE-S18S4G1

3 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 14

总计 676