修复你的物品 社区 商店

GameSir T4 Pro Directional Pad Replacement

简介

This guide will help you repair the directional pad on your GameSir Pro T4.

Directional pads need replacement after wear and tear over time or if it somehow cracks.

你所需要的

  1. GameSir T4 Pro Directional Pad Replacement, Battery: 步骤 1 中的图像 1，1

    • Using the Phillips 1 screwdriver, gently turn the screw to the left (repeat this step until all four screws are taken out).

    编辑

  2. GameSir T4 Pro Directional Pad Replacement: 步骤 2 中的图像 1，1

    • Use your iFixit opening tool to break the seam of the back of your controller.

    • Be careful when pulling apart, as the charging port wires are connected to both sides of the controller.

    编辑

  3. GameSir T4 Pro Directional Pad Replacement: 步骤 3 中的图像 1，1

    • Using the plastic spudger, wiggle the connection out of place.

    编辑

  5. GameSir T4 Pro Directional Pad Replacement: 步骤 4 中的图像 1，1

    • Apply a slow, but consistent pull to the old 600 maH battery.

    • Attach new battery onto the pad.

    编辑

  6. GameSir T4 Pro Directional Pad Replacement, Directional Pad: 步骤 5 中的图像 1，2 GameSir T4 Pro Directional Pad Replacement, Directional Pad: 步骤 5 中的图像 2，2

    • To get to the directional pad (d-pad), remove the three 5mm screws on the motherboard.

    编辑

  7. GameSir T4 Pro Directional Pad Replacement: 步骤 6 中的图像 1，1

    • Disconnect all white connectors from the motherboard.

    编辑

  8. GameSir T4 Pro Directional Pad Replacement: 步骤 7 中的图像 1，1

    • Carefully pull the motherboard away to reveal the front panel.

    编辑

  9. GameSir T4 Pro Directional Pad Replacement: 步骤 8 中的图像 1，1

    • Remove the d-pad from the front panel.

    编辑

  10. GameSir T4 Pro Directional Pad Replacement: 步骤 9 中的图像 1，1

    • Place your new d-pad in place.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 6

过去 30 天： 27

总计 776