修复你的物品 社区 商店

GameSir T4 Pro Battery Replacement

简介

Use this guide to remove the battery from your GameSit T4 Pro controller. All you need for this repair is a Phillips #1 screwdriver and the iFixit opening tool. For the battery replacement, this controller requires a 600 maH battery. Complete this repair guide before continuing to the other repair guides.

你所需要的

  1. GameSir T4 Pro Battery Replacement, Battery: 步骤 1 中的图像 1，1

    • Using the Phillips 1 screwdriver, gently turn the screw to the left (repeat this step until all four screws are taken out).

    翻译

  2. GameSir T4 Pro Battery Replacement: 步骤 2 中的图像 1，1

    • Use your iFixit opening tool to break the seam of the back of your controller.

    • Be careful when pulling apart, as the charging port wires are connected to both sides of the controller.

    翻译

  4. GameSir T4 Pro Battery Replacement: 步骤 3 中的图像 1，1

    • Using the plastic spudger, wiggle the connection out of place.

    翻译

  5. GameSir T4 Pro Battery Replacement: 步骤 4 中的图像 1，1

    • Apply a slow, but consistent pull to the old 600 maH battery.

    • Attach new battery onto the pad.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

3条评论

Battery Model is pl502450 600mah

3.7v

Eugene Eugenio - 回复

Where can I buy this battery? Do You have a link to it?

Roberto Barros -

Where can I buy this battery?

Roberto Barros - 回复

添加评论

浏览统计数据:

过去 24 小时： 4

过去 7 天： 19

过去 30 天： 104

总计 1,689