跳转到主内容

简介

Use this guide to remove and change faceplates.

工具

配件

没有特定配件。

  1. Locate the two circular holes on the side of the Game Boy nearest to the directional pad. Locate the two circular holes on the side of the Game Boy nearest to the directional pad.
    • Locate the two circular holes on the side of the Game Boy nearest to the directional pad.

  2. Straighten the end of a paper clip and push it into each of the circular holes. You may hear a faint click afterwards. Use the paper clip to lever the faceplate off from the unit.
    • Straighten the end of a paper clip and push it into each of the circular holes.

    • You may hear a faint click afterwards.

    • Use the paper clip to lever the faceplate off from the unit.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Jack

于2010年01月21日注册

375 信誉积分

创作了3篇指南

团队

Cal Poly, Team 8-46, Regan Winter 2010 Cal Poly, Team 8-46, Regan Winter 2010 的会员

CPSU-REGAN-W10S8G46

5 名成员

创作了20篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 14

过去的30天: 76

总计 16,126