简介

Is the outside shell of your Game Boy cracked, damaged, or you're just getting sick of your old housing? This guide outlines how to get down to the front housing so you can swap it out!

  1. Locate the battery compartment on the back of the Game Boy Color.
    • Locate the battery compartment on the back of the Game Boy Color.

    • Push down on the tab and hinge the cover downwards and outwards to remove the battery cover.

    添加评论

  2. Remove the batteries from the battery compartment.
    • Remove the batteries from the battery compartment.

    添加评论

    • Using a Y1 screwdriver, remove the six screws on the back of the device as pictured. The bottom two screws are located inside of the battery compartment.

    添加评论

    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing out!

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Push up on the tabs on either side of the ribbon with a spudger.

    添加评论

    • Gently remove the ribbon cable from the port

    添加评论

    • Using the Phillips #1 screwdriver, remove the 3 screws shown in the picture.

    It’s not mentioned here, but be sure to unplug the LCD flex cable at the top of the motherboard before removing the motherboard. To do so, gently press the clips on either side of the receptacle toward the top of the Game Boy. When they are both pressed up, the orange cable will slide freely out

    Ben Perkins - 回复

    Thanks Ben. That's a very good point. Just ripping it out will cost you a couple bucks, not to mention your Gameboy will not work until you replace that ribbon cable.

    Chris Pavlik - 回复

    • Gently lift the motherboard from the front housing.

    添加评论

    • Remove the rubber backing on each button grouping.

    添加评论

    • Remove the original buttons from the housing.

    添加评论

    • Gently pry and lift the LCD Display from the front panel.

      • Twisting the front casing may help gain more leverage.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

11等其他人完成本指南。

Angela Yoeurng

于2013年01月18日注册

944 信誉积分

创作了2篇指南

团队

Cal Poly, Team 19-47, Regan Winter 2013 Cal Poly, Team 19-47, Regan Winter 2013 的会员

CPSU-REGAN-W13S19G47

4 名成员

创作了24篇指南

添加评论

浏览统计数据:

过去的24小时: 4

过去的7天: 7

过去的30天: 58

总计 5,297