GM Key Fob Plastic Housing Replacement - iFixit 维修指南

加入维修社区 - 创建账户

简介

This purpose of this guide is to provide clear instructions for replacing the plastic housing for a GM Key Fob. Replacing just the housing, instead of the entire Fob, can save the individual a significant amount of money in addition to reducing environmental and electrical waste.

你所需要的

步骤 1 Key Fob Plastic Housing

GM Key Fob Plastic Housing Replacement, Key Fob Plastic Housing: 步骤 1 中的图像 1，1

Pry apart the key ring to remove it from the old housing.

步骤 2

GM Key Fob Plastic Housing Replacement: 步骤 2 中的图像 1，3

GM Key Fob Plastic Housing Replacement: 步骤 2 中的图像 2，3

GM Key Fob Plastic Housing Replacement: 步骤 2 中的图像 3，3

Once you have removed the key ring, use it to open the housing by wedging it into the groove, as pictured.

步骤 3

GM Key Fob Plastic Housing Replacement: 步骤 3 中的图像 1，2

GM Key Fob Plastic Housing Replacement: 步骤 3 中的图像 2，2

Remove the electrical board and rubber key pad from the old housing.

步骤 4

GM Key Fob Plastic Housing Replacement: 步骤 4 中的图像 1，2

GM Key Fob Plastic Housing Replacement: 步骤 4 中的图像 2，2

Remove the electrical board from the rubber key pad.

步骤 5

GM Key Fob Plastic Housing Replacement: 步骤 5 中的图像 1，2

GM Key Fob Plastic Housing Replacement: 步骤 5 中的图像 2，2

If necessary, remove the battery from the electrical board and replace it.

步骤 6

GM Key Fob Plastic Housing Replacement: 步骤 6 中的图像 1，1

After Opening the new Key Fob package, select the correct housing as more than one model is included.

结论

To reassemble your device, simply follow these disassembly instructions in reverse order.

2等其他人完成本指南。

作者

与5其他贡献者

Megan Hayden

于10/06/16注册

151 声望

撰写一个指南

团队

University of Memphis, Team 4-3, Baddour Fall 2016 University of Memphis, Team 4-3, Baddour Fall 2016 的会员

UM-BADDOUR-F16S4G3

3 名成员

创作了2篇指南

0指南评论

浏览统计数据:

过去 24 小时： 4

过去 7 天： 17

过去 30 天： 63

总计 3,313